How Much Does Epoxy Flooring Cost in the UAE?

There is no single epoxy flooring price in the UAE. Designer metallic epoxy flooring is priced per project, supply and install, after we have seen the slab. What that price buys is a multi-layer artistic pour — swirled, marbled, sealed under a high-gloss topcoat — not the thin grey garage coating advertised for a fraction of the price. RBS Group, the UAE’s No.1 decorative surfaces company, pours designer epoxy floors across Dubai and Abu Dhabi. For services by location, see metallic epoxy flooring in Dubai, epoxy flooring in Dubai and metallic epoxy in Abu Dhabi.

How much does epoxy flooring cost in the UAE?

Designer and metallic epoxy flooring is priced per project in the UAE, supplied and installed — we do not publish a per-square-metre rate for it, because the slab and the artistry you choose decide the figure. The price covers the full system: diamond grinding of the slab, multiple pigmented resin layers worked into swirls or marble effects, and a premium protective topcoat.

What is the epoxy flooring price in Dubai?

There is no single epoxy flooring price in Dubai or the rest of the UAE to quote you here. Designer and metallic epoxy is priced per project, supplied and installed, after a site visit, because the slab’s condition, the number of pigment layers and the topcoat decide the figure. A price you see advertised cheaply is almost always a single roller coat, which is a different product.

Why do epoxy quotes in the UAE vary so wildly?

Epoxy quotes vary because two very different products share one name: a thin industrial roller coat and a multi-layer designer system. Basic garage epoxy — a single coat applied by roller — is the figure you see advertised cheaply, and for a car park bay it may be perfectly adequate. Designer epoxy is a different craft altogether: a poured, multi-layer system with metallic pigment artistry, which is why comparing the two quotes is comparing two different floors.

What does a typical designer epoxy floor cost in total?

We price the whole floor after seeing it, supply and install. A 60 m² showroom, boutique or luxury garage and a villa study or walk-in wardrobe pass through the same preparation and curing stages regardless of size, which is why small floors cost proportionally more per square metre than large ones.

What moves the price

The price moves with the specification:

• Pigment layers — how many, and the complexity of the swirl or marble artistry within them.
• Topcoat — PU or polyaspartic floor coating high-gloss systems sit at the upper end.
• Custom colour matching — to a brand, a stone or an interior scheme.
• Surface preparation — grinding depends on the condition of the existing slab.
• Area size — setup and curing time are similar whether the floor is 30 m² or 300 m².

Every price is supply and install. Bespoke commissions — unusual colourways, large artistic floors — are priced on consultation, and every exact quote follows a site visit, because the slab’s condition, its moisture level and the artistry you choose all shape the final figure.

Epoxy flooring cost per square foot in the UAE

We do not publish a per-square-foot rate for designer epoxy; we quote and measure in square metres after seeing the slab. If a competitor’s price sheet is in square feet, multiply it by 10.764 to get the per-metre figure, and check what it actually includes: a basic single-coat roller epoxy costs a fraction of a designer pour per square foot, but it is a different, thinner product.

Epoxy floor coating cost per square metre, per m² and per square foot — quick reference

	Designer / metallic epoxy (our system)	Basic single-coat garage epoxy (not ours)
How it is laid	Poured, multi-layer, pigment artistry, high-gloss topcoat	One roller coat
Slab preparation	Diamond ground	Often a clean only
How we price it	Per project, after a site visit, per m²	We do not lay it
What to compare	Layers, topcoat and grinding included	Whether the same scope is there at all

The two columns are different products, not two prices for the same floor — a single roller coat and a multi-layer designer pour share a name in the UAE market but not a process. Our own designer epoxy floor is always quoted per square metre, supplied and installed; a square-foot figure from anyone is simply the per-metre one divided by 10.764.

Is metallic epoxy cheaper than porcelain tiles?

It depends on the floor, and we quote epoxy after a site visit, so the honest answer is a comparison of scope rather than a number: a tile’s price is only part of the tile bill — tiling labour, adhesive and grouting add to it — and designer epoxy arrives without a single grout line to clean or discolour. Tiles keep one clear advantage: the outdoors. Under direct UAE sun and 45°C summers, epoxy will amber and lose its gloss over time, so for open terraces and pool surrounds porcelain remains the better choice. Designer epoxy belongs inside.

How durable is metallic epoxy in the UAE climate?

Designer epoxy is very hard-wearing indoors: chemical-resistant, stain-resistant and completely seamless, with no grout lines for coastal humidity to attack. One honest caveat — like any high-gloss floor it can scratch under grit, and mirror finishes show it. In a country where sand travels indoors on every sole, a good mat at the entrance earns its keep.

For the metallic pour on its own, see metallic epoxy flooring cost in the UAE.

For a real epoxy flooring price for your floor, send a photo of the slab and the rough size on WhatsApp; the exact quote follows a site visit.

Related guides

• Polyaspartic vs Epoxy: Which Floor Coating Should You Choose?
• Where Does Flake Epoxy Actually Belong?
• Epoxy Flooring vs Tiles: Which Is Better for a UAE Home?
• Epoxy vs Tiles: Which Garage Floor Should You Choose?
• Is Epoxy Flooring Slippery in the UAE?
• Garage floor coating in Dubai
• How to Care for a Metallic Epoxy Floor

FAQ

What is the epoxy flooring price in the UAE?

There is no single epoxy flooring price in the UAE. Designer and metallic epoxy is priced per project, supplied and installed, after a site visit, because the slab, the pigment layers and the topcoat decide the figure.

Why is one epoxy flooring price in Dubai so much cheaper than another?

The cheap figure is usually a single roller coat on a cleaned slab; the higher one is a diamond-ground, multi-layer poured system with a protective topcoat. They share a name but not a process, so compare what each quote includes.

What is the epoxy floor price per m² or per square foot?

We do not publish a per-m² or per-square-foot rate for epoxy; we measure and quote in square metres after seeing the slab. To compare a square-foot price sheet with a per-metre one, multiply it by 10.764.

Why does a small epoxy floor cost more per square metre?

Grinding, layer-by-layer pouring and curing take much the same time on 30 m² as on 300 m², so the fixed part of the job weighs more on a small floor.

Is epoxy flooring priced the same for a garage and a living room?

No. The room decides the specification — a textured, grippy finish where water lands, a smooth gloss in a dry space — and the specification decides the price. See is epoxy flooring slippery for how grip is built in.

Is a 20-litre epoxy kit cheaper than an installed epoxy floor?

The bucket is cheaper; the floor usually is not. A 20-litre kit price buys material only, and how far it goes depends on the coat thickness, the slab’s porosity and how many layers the floor needs. What decides whether an epoxy floor lasts in the UAE is the work around the material: grinding the slab, checking it for moisture, priming, and a UV-stable topcoat where sun reaches it. A kit rolled onto an unprepared slab is the floor that peels within a season. We do not sell kits; our designer epoxy floors are priced per project after a site visit. Send a photo of the floor on WhatsApp and we will tell you honestly whether it needs a poured system or whether a simple coating will do.

What does an epoxy flooring quote include?

A proper quote names the work around the material: grinding the slab, checking it for moisture, priming, the pigment or flake layers, and the protective topcoat. If a quote lists only “epoxy coating” with no preparation, you are comparing a different job. Ask for the specification in writing, and for how the floor is measured.

Why do epoxy flooring costs in Dubai differ between metallic, flake and plain coatings?

The effect decides the labour. A metallic floor is poured and worked layer by layer to get its swirls; a flake floor is broadcast and sealed; a plain coating is rolled. More hand work and more layers mean a different job, so the quotes differ even on the same slab.

Can I get an epoxy flooring price in Dubai without a site visit?

Not a firm one. Epoxy flooring has no fixed rate in the UAE: the slab, its moisture, the finish you choose and the room decide the figure, so we price each floor per project after a site visit. To start, send photos of the floor, the rough size and the room on WhatsApp and we will tell you whether epoxy suits it before anyone visits. Be wary of any epoxy flooring price quoted without seeing the slab: it is a guess, and the gap shows up later in the preparation.