Polished Concrete Floors in Dubai

Yes, the two names mean the same floor. Polished concrete floors are concrete slabs ground through progressively finer diamond tooling, hardened with a densifier that reacts inside the surface, and polished until the sheen comes from the concrete itself — honed matte, satin or high gloss. Nothing sits on top, so there is no coating to scratch, peel or yellow. A floor that is ground and then given a glossy sealer is a coated floor, not polished concrete, even when it is sold under the same name.

Decorative concrete flooring is any concrete floor finished to be seen rather than covered: polished, stained, overlaid, or textured with exposed aggregate. Polished concrete is the plainest version — the slab itself, ground and polished. Acid or water-based stains add colour to a sound slab, a cementitious overlay gives a tired slab a new surface, and exposed aggregate or bush-hammered texture suit outdoor areas. Which one fits depends on the slab and the room, which is why each is priced after a site visit.

True densified polished concrete is priced per project in Dubai, supply and install, after we have seen the slab. That is the full mechanical process — grinding, densifying and polishing the slab itself — not a grind-and-seal coating, which is often sold under the same name for far less and wears like the coating it is. Larger open floors price lower per square metre; small, cut-up rooms price higher. Every driver is explained in our polished concrete cost guide.

If you are anywhere in Dubai, yes. We are based in Business Bay (The Exchange Tower) and work anywhere in Dubai, from the Marina to Mirdif and the industrial areas. RBS is responsible for every job, start to finish, so the company that inspects your slab is the company that answers for the finished floor. The honest test for any contractor near you is to ask for a floor that is two years old, and to ask whether they densify or just seal.

Ask three things. First, densified or grind-and-seal — the answer separates a polished floor from a coated one. Second, who is responsible for the floor from the first grind to the final polish. Third, ask to see a floor at least two years old and in traffic, not a fresh photo. A company that answers all three plainly is worth talking to, whether or not it is us.

We supply and install as one job. We do not sell densifiers, sealers, stains or overlay material for DIY or to other contractors, because the result depends entirely on the machine work and the hands on it, and we would rather not put our name on a product we did not apply. If you only want material, a specialist trade supplier is the right call; if you want a finished floor, that is what we do.

Different trades. Ready-mix suppliers and structural contractors pour, cut and supply concrete slabs; we do not. RBS is the finishing trade — we take a slab that already exists and grind, densify, polish, stain or overlay it. If you are looking for a company to pour a new floor or driveway, you need a structural contractor first; once the slab has cured, we are the company that makes it a floor worth looking at.

Yes — staining is part of what we do. Acid stains react into a sound slab and water-based stains colour it, and we then seal or polish the floor. The result is variegated and organic, never the same twice, and because it depends on the slab's own chemistry we test a patch first. Stained floors are priced on consultation after that test; our acid-stained concrete page shows what the finish honestly looks like.

No — we do not lay stamped concrete. RBS applies seamless decorative surfaces, not a pattern stamped or formed into wet concrete, so a stamped concrete contractor, company or supplier is a different trade to ours, wherever in the UAE you are searching from. What we apply instead, to the same slab, is real texture without the formed joints stamped concrete relies on: exposed aggregate, a spray-stencil overlay, or acid and water-based staining. See the honest comparison in stamped concrete vs stone carpet, including for driveways and pool surrounds.

We can't quote it, because RBS doesn't install stamped concrete, and we would rather say so than guess a competitor's price. What we can quote is what we actually do to a slab: true densified polishing, staining and overlays, each priced after a site visit. If a stamped, textured driveway or pool deck is the look you want, our own alternatives — exposed aggregate, a spray-stencil overlay or a resin-bound stone carpet — are explained honestly on their own pages.

Yes. We are Dubai-based and travel — Sharjah and Ajman are a short drive, and we take on Abu Dhabi and the northern emirates for floors of a sensible size, because the grinding machinery travels with the job. The same process, the same way of pricing and the same responsibility — RBS, start to finish — apply anywhere in the UAE; the site visit confirms the exact quote.

Not us, and we would rather point you the right way than take the enquiry. A concrete slab company or slab supplier pours and cures the structural slab itself — a different trade from ours. RBS is the finishing company: we take a slab that already exists, whether newly poured or decades old, and grind, densify, polish, stain or overlay it. If a slab needs pouring first, a structural contractor or ready-mix supplier is who you want; once it has cured, we are the company that turns it into a finished floor.

Concrete and terrazzo, yes; marble and glazed tiles, no. Polished concrete floors that have gone dull in the walkways usually need a re-burnish, not a re-grind, and a deeper re-polish only after real damage. Terrazzo is re-polished or re-ground as one surface, and chips are repaired in place. We do not polish marble or granite — that is a stone restoration specialist's work — and glazed ceramic or porcelain tiles cannot be polished at all, because their shine is the glaze. Our floor polishing in Dubai guide goes through every floor type.

No — a cast concrete countertop is a separate mould-and-pour craft, not a floor-grinding job, and it isn't a service we offer. We do not make or coat countertops in any material: for a worktop, a stone, quartz or porcelain slab from a fabricator is the right choice. What we can do is the concrete look on the floor and walls around it — see microcement in the kitchen.

Yes, though 'coating' covers two different things and the honest answer depends which you mean. A poured resin coating over a concrete floor is epoxy — see epoxy flooring in Dubai, priced after a site visit. Densifying and polishing the slab itself, with nothing added on top, is what this page covers, also priced after a site visit once we've seen the slab. Both are things RBS installs, start to finish; which one you want depends on whether you'd rather add a coating or reveal the concrete underneath it.